KYMCO Like 150i ABS Noodoe CVT Performance Modifications

[scootaholic]

Have any of you KYMCO Like 150i ABS Noodoe owners done any CVT performance modifications? And if so, what improvements did you realize with whatever modifications you made?

Thanks in advance for replying!

 

[mrmike]

I have a '23 People S 150 ABS. I believe it is the same motor. I replaced the factory 13gr rollers with 11.5 gr Dr. Pulley sliders. Great improvement in lower end response. The scooter struggles at the top but will run close to 60mph. I absolutely recommend pulling the variator apart first and weighing your stock rollers. If you want improved acceleration for city use go to 1 or 1.5gr lighter Dr Pulley sliders. You could try a little heavier slider and it might improve your top end slightly. With that 150 I don't think you'll see any better than possibly 62 or 3.

 

[scootaholic]

I have a '23 People S 150 ABS. I believe it is the same motor. I replaced the factory 13gr rollers with 11.5 gr Dr. Pulley sliders. Great improvement in lower end response. The scooter struggles at the top but will run close to 60mph. I absolutely recommend pulling the variator apart first and weighing your stock rollers. If you want improved acceleration for city use go to 1 or 1.5gr lighter Dr Pulley sliders. You could try a little heavier slider and it might improve your top end slightly. With that 150 I don't think you'll see any better than possibly 62 or 3.

Okay, thanks. I am thinking about getting the Malossi Multivar 2000 CVT kit.